|
|

 |
 |
| |
|
Proscend SHDSL ruter /
modem do 2.3 Mb/s |
| |
|
Proscend 5111 SHDSL ruter predstavlja
odlično rešenje za LAN-to-LAN i
LAN-to-Internet vezu preko standardne telefonske parice (pogledajte
gornju sliku). Na sebi ima UTP 10/100 Mb/s port preko
koga se spaja na hab ili svič u lokalnoj (LAN) računarskoj mreži.
SHDSL port se povezuje na bakarnu paricu preko koje može ostvariti brzinu do
2.3 Mb/s. Maksimalan domet je prilično veliki - u praksi se obično 2.3
Mb/s može postići na iznajmljenim linijama dugim 5-7 km a zatim brzina
počinje da pada. Maksimalan domet je do 15km, često i više ali naravno to
zavisi od kvaliteta i prečnika parice. Instalacija je zaista jednostavna jer
uređaj poseduje Web management uz konzolni i Telnet pristup a podržan je
SNMP protokol. Poseduje veliki broj naprednih funkcija koje se po pravilu ne
mogu naći kod sličnih uređaja drugih proizvođača - spomenućemo napredni
Firewall, sigurnosne access liste, VPN (Virtual Private Networks)
PPTP/L2TP/IPSec tunneling (spajanje više LAN mreža
preko Interneta uz kriptovanje saobraćaja radi sigurnosti),
DMZ host/Multi-DMZ/Multi-NAT (DMZ=
demilitarizovana zona), Virtual server mapping, DHCP, DNS... Osim
ruter / modema koji ima Ethernet UTP port Proscend proizvodi i SHDSL modeme
sa G.703, V.35 i X.21 interfejsima. G.703 NTU se obično koristi za
vezu između telefonskih centrala i/ili ISDN PRI remote access servera i/ili
raznih multipleksera - za E1, ISDN PRI i sl. linije. Modemi sa V.35 i
X.21 interfejsima se obično spajaju na rutere i tako koriste za LAN-to-LAN
vezu - ipak savetujemo korišćenje Proscend 5111 ruter / modema kao jednog
uređaja što je i jednostavnije i ekonomičnije. Detaljne
karakteristike uređaja možete videti u
nastavku. Napominjemo da Proscend kao OEM/ODM proizvođač stoji iza mnogih
poznazih etiketa kao i da neki od najvećih svetskih telekoma poseduju
instalacije sa hiljadama, pa i desetinama hiljada Proscend SHDSL i ADSL
uređaja. |
| |
|

|
| |
|
Proscend
5111 SHDSL (Single-Paired High Speed Digital Subscriber Loop) ruter
complies with G.992.2 standard with 10/100 Base-T auto-negotiation. It
provides business-class, multi-range form 192Kbps to 2.304Mbps payload rates
over exiting single-pair copper wire. Proscend SHDSL routers are designed
not only to optimize the service bit rate form central office to customer
premises also it integrates high-end Bridging/Routing capabilities with
advanced functions of Multi-DMZ, virtual server mapping and VPN
pass-through.
Proscend 5111 provides not only advanced functions Multi-DMZ, virtual
server mapping and VPN pass-through but advanced firewall, SPI, NAT, DoS
protection serving as a powerful firewall to protect form outside intruders
of secure connection.
The Proscend SHDSL router allows customers to leverage the latest in
broadband technologies to meet their growing data communication needs.
Through the power of Proscend SHDSL products, you can access superior
manageability and reliability.
FEATURES
 |
Easy configuration and management with password control for various
application environments
|
 |
Efficient IP routing and transparent learning bridge to support broadband
Internet services
|
 |
VPN pass-through for safeguarded connections
|
 |
Built-in advanced SPI firewall
|
 |
DMZ host/Multi-DMZ/Multi-NAT enables multiple workstations on the LAN to
access the Internet for the cost of IP address
|
 |
Fully ATM protocol stack implementation over SHDSL
|
 |
PPPoA and PPPoE support user authentication with PAP/CHAP/MS-CHAP
|
 |
SNMP management with SNMPv1/SNMPv2 agent and MIB II
|
 |
Getting enhancements and new features via Internet software upgrade
|
SPECIFICATIONS
Routing
 |
Support IP/TCP/UDP/ARP/ICMP/IGMP protocols
|
 |
IP routing with static routing and RIPv1/RIPv2 (RFC1058/2453)
|
 |
IP multicast and IGMP proxy (RFC1112/2236)
|
 |
Network address translation (NAT/PAT) (RFC1631)
|
 |
NAT ALGs for ICQ/Netmeeting/MSN/Yahoo Messenger
|
 |
DNS relay and caching (RFC1034/1035)
|
 |
DHCP server (RFC2131/2132)
|
Bridging
 |
IEEE 802.1D Transparent Bridging
|
Security
 |
DMZ host/Multi-DMZ/Multi-NAT function
|
 |
Virtual server mapping (RFC1631)
|
 |
VPN pass-through for PPTP/L2TP/IPSec tunneling
|
 |
Natural NAT firewall
|
 |
Advanced stateful packet inspection (SPI) firewall
|
 |
Denial of service protection
|
 |
User access control; deny certain PCs access to internet services
|
Management
 |
Easy-to-use web-based GUI for quick setup, configuration and management
|
 |
Menu-driven interface/Command-line interface (CLI) for local console and
Telnet access
|
 |
Password protected management and access control list for administration
|
 |
SNMP management with SNMPv1/SNMPv2c (RFC1157/1901/1905) agent and MIB II
(RFC1213/1493)
|
 |
Software upgrade via web-browser/TFTP server
|
ATM
 |
Up to 8 PVCs
|
 |
UBR/CBR/VBR traffic shaping
|
 |
OAM F5 AIS/RDI and loopback
|
 |
AAL5
|
AAL5 Encapsulation
 |
VC multiplexing and SNAP/LLC
|
 |
Ethernet over ATM (RFC 2684/1483)
|
 |
PPP over ATM (RFC 2364)
|
 |
Classical IP over ATM (RFC 1577)
|
PPP
 |
PPP over Ethernet (RFC 2516)
|
 |
PPP over ATM (RFC 2364)
|
 |
User authentication with PAP/CHAP/MS-CHAP
|
WAN Interface
 |
SHDSL: ITU-T G.991.2 (Annex A, Annex B)
|
 |
Encoding scheme: 16-TCPAM
|
 |
Data Rate: N x 64Kbps (N=1~36)
|
 |
Impedance: 135 ohms
|
LAN Interface
 |
10 Base-T and 100 Base-T auto-negotiation
|
Hardware Interface
 |
WAN: RJ-11
|
 |
LAN: RJ-45
|
 |
Console port: RS232
|
Indicators
 |
General: PWR
|
 |
WAN: LNK, ACT
|
 |
LAN: 10M/ACT, 100M/ACT, ALM
|
Physical/Electrical
 |
Dimensions: 18.7 x 3.3 x 14.5 cm (WxHxD)
|
 |
Power: 100~240VAC
|
 |
Power consumption: 6 watts
|
 |
Temperature: 0~45°C
|
 |
Humidity: 0%~95% RH (non-condensing)
|
Memory
 |
2MB Flash Memory, 4MB SDRAM
|
|
| |
|

|
|
|
|
Proscend SHDSL NTU E1 2.048 Mbps
(Nx64K) G.703, LCD |
|
|
|
Proscend 5000-EAL, SHDSL NTU E1 interface AC input with LCD display, offers
two different ways to connect customers to high-speed TDM services with two
G.703 E1 interfaces (balance 120Ω RJ45 jack and unbalance 75Ω dual BNCs).
The G.703 interface will carry 64kbps to 2.048Mbps.
The SHDSL NTU can be configured and managed via EOC, or menu-driven VT100
compatible Asynchronous Terminal Interface, either locally or remotely.
Proscend 5000-EAL is equipped with an auto rate capability that
identifies the maximum line rate supported by the copper loop. This powerful
automatic configuration capability makes installation and service
provisioning simple and painless. Further flexibility is provided in the
ability to manually set the maximum NTU speed at different levels for
different customer-tailored service offerings.
FEATURES
 |
Standard G.shdsl (ITU G.991.2) supports for improved reach/speed and
greater interoperability
|
 |
Fast and cost-effective provisioning of traditional frame relay (FR or
T-HDLC) or TDM leased line services
|
 |
User existing copper loop infrastructures
|
 |
Can operate back to back connection
|
 |
Efficient single wire pair usage
|
 |
Up to 2.3Mbps symmetric service bit rate
|
 |
Auto rate installation maximizes data rate based on loop conditions
|
 |
Local management interface with LCD display
|
 |
Remote line loopback
|
 |
SHDSL Line performance monitoring
|
 |
Raw and per time interval statistics
|
 |
Bandwidth guarantee transmission equipment
|
SPECIFICATIONS
Network Interface
 |
Line Rate: SHDSL per ITU G.991.2
|
 |
Coding: Trellis coded pulse amplitude modulation
|
 |
Support: ANSI (Annex A) and ETSI (Annex B)
|
 |
Payload rates: 192kbps to 2.304Mbps N x 64kbps (N=3 to 36)
|
 |
Connection: RJ-48 jack (2-wire)
|
G.703 Interface
 |
RJ-48C for balanced 120Ω
|
 |
BNC for unbalance 75Ω
|
Framing
 |
G.703/G.704
|
 |
CRC 4 enable/disable
|
 |
Unframed
|
 |
Framed
|
DSL Timing
Performance Monitoring
 |
ES, SES, UAS, Alarms, Errors for E1, SHDSL
|
Loopback Tests
 |
Local Loopback
|
 |
Digital Loopback
|
 |
Remote Loopback
|
 |
V.54 Loopback
|
 |
Build-in 211-1 bit tester
|
Management
 |
Configuration with keypad and LCD display
|
 |
Console port
|
 |
Support firmware upgradeable
|
Physical/Electrical
 |
Dimensions: 19.5 x 4.8 x 16.8 cm
|
 |
Input: 90~240VAC with 50~60Hz
|
 |
Power Consumption: 10W Max
|
 |
Operation: 0 to 50°C
|
 |
Humidity: Up to 95% (non-condensing)
|
|
|